Site inspection
Work in place, observed before it is covered
Foundations, framing, envelope and MEP rough-in checked against plans, code and policy conditions — measured, photographed and logged on site.
Book a site inspection
Booking inspections nationwide · reports in as little as 24 hours
Inspection that stands up as evidence.
Licensed engineers inspecting construction in progress for builder's risk carriers, and standing property for the owners who hold it — photographed, geo-tagged and signed off before it ever reaches you.
- Itemised proposal in 1 business day
- No-obligation quote
- InterNACHI · ASHI · ASTM
- In practice
- 17 yrs In practice
- Inspections delivered
- 31k+ Inspections delivered
- Certified inspectors
- 210+ Certified inspectors
- On-time report delivery
- 99.2% On-time report delivery
Standards we work to
- ASTM E2018-15
- ASTM E1527-21
- InterNACHI SOP
- ASHI SOP
- NFPA 25 / 72
- IBC / IRC
- EPA AAI
- FAA Part 107
- AHERA
- AARST-NRPP
What we deliver
Every kind of visit a property programme needs
From the first plan review to the final service report, each visit type has its own checklist, its own standard and its own deliverable — all on one platform.
Site inspection
Pre-inspection
Existing damage logged before anyone starts
PCAR
Every building system, graded and costed
Plan review
Drawings checked before ground breaks
Site safety
Fire-watch, access and housekeeping
Service report
Findings written for the person who decides
Builder's risk coverage
On site before the concrete, and after the keys
Construction risk is not evenly spread across a programme. Our visit cadence follows where the exposure actually sits.
-
01
Pre-construction
Plan review
Documents reviewed against policy conditions before anyone breaks ground.
-
02
Below grade
Trenching & foundation
Excavation, waterproofing and foundation placement observed before they are covered.
-
03
Frame
Vertical start
Erection, connections and load paths as the structure goes up.
-
04
Dry-in
Envelope & fit-out
Water intrusion risk, envelope integrity and interior progress.
-
05
Completion
Closeout
Final inspection and the consolidated report for the carrier file.
Three kinds of client
The same evidence, written for whoever has to act on it
An owner wants a repair list, a builder wants a sign-off, an underwriter wants a risk grade. The fieldwork is identical; the report is shaped around the reader.
Owners & buyers
Buy, sell or hold with your eyes open
Pre-purchase, pre-listing and condition inspections — each defect photographed, graded for severity and given a realistic repair range.
Inspections for owners
Construction teams
Visits timed to your pour dates
Milestone inspections booked against your schedule, below grade through handover, with findings issued while the trade is still on site.
Plan a construction programme
Carriers & brokers
See the risk before you bind
Builder's risk monitoring, condition surveys and loss-control visits, paced to where the exposure sits in each build.
Programmes for carriers
Inspection disciplines
Full catalog
Every inspection a U.S. property will ever need
Six practice areas. Fifty-one disciplines. One accountable team — so a single asset never needs four vendors and four incompatible reports.
10 disciplines
Residential Inspections
Single family homes, condominiums, townhomes and small multi-unit dwellings inspected to InterNACHI and ASHI standards of practice — for buyers, sellers, builders and portfolio owners.
View services
9 disciplines
Commercial & Multi-Family
Due diligence and condition assessment for income-producing real estate — apartment portfolios, mid-rise and high-rise towers, office, retail, industrial and hospitality assets, delivered to ASTM E2018 standards.
View services
8 disciplines
Structural & Engineering
Licensed professional engineer evaluations of load-bearing systems, building envelopes and elevated elements — including the mandated facade and balcony inspection cycles now in force across major U.S. jurisdictions.
View services
7 disciplines
Environmental & Indoor Air Quality
Environmental due diligence and hazardous material assessment performed by accredited inspectors and Environmental Professionals — from ASTM Phase I ESAs to EPA protocol radon, lead and asbestos work.
View services
10 disciplines
Building Systems & Specialty
Single-discipline inspections performed as add-on scopes or standalone engagements — the specialist trades that a general inspection defers to a specialist.
View services
7 disciplines
Insurance, Lender & Compliance
Inspections mandated by insurance carriers, mortgage lenders and government programs — the forms and certifications required to bind coverage, fund a loan or pass a regulatory audit.
View services
Product types
Scoped by what you are actually building
A tract development and a 40-storey tower do not get the same checklist, visit cadence or inspector. Every proposal is scoped per product type, with the quantities that product actually uses — lots and phases for a development, levels and built-up area for a high rise.
Scope my project
SF
Single family
SFD
SF development
MF
Multi family
MHR
Mid rise
MRHR
Mid / high rise
COMM
Commercial
IND
Industrial
PARKING
Parking structure
ROOF
Roof
Most requested
See pricing
The inspections our clients order most
Transparent base pricing, published standards and a fixed turnaround on every engagement.
ESA-1
Environmental & Indoor Air Quality
Phase I Environmental Site Assessment
ASTM E1527-21 all appropriate inquiry for CERCLA liability protection.
- From
- $2,800 per property
- On site
- 15 – 20 business days
FOUR-POINT
Insurance, Lender & Compliance
Four-Point Insurance Inspection
Roof, electrical, plumbing and HVAC report required to bind coverage.
- From
- $165 per property
- On site
- 45 – 90 minutes
PCA
Commercial & Multi-Family
Property Condition Assessment (PCA)
The institutional standard of care for commercial real estate due diligence.
- From
- $3,500 per property
- On site
- 1 – 5 days on site
HOME-GEN
Residential Inspections
Home Inspection (Buyer's)
The complete general home inspection performed during a real estate transaction.
- From
- $495 per property
- On site
- 2.5 – 4 hours
STRUCT-ENG
Structural & Engineering
Structural Engineering Inspection
Licensed PE evaluation of load-bearing systems and observed distress.
- From
- $1,250 per property
- On site
- 2 – 6 hours
SF-RES
Residential Inspections
Single Family Residence Inspection
Detached single family dwelling assessment for owners, investors and lenders.
- From
- $550 per property
- On site
- 3 – 5 hours
How an engagement runs
Six checkpoints between your first message and a signed report
Each one is a status in our software, so the answer to “where is it?” is never a guess.
-
1
Brief
Address, property type and the question you need answered — a few minutes online.
-
2
Itemised quote
Every scope, standard and fee on its own line, normally the next business day.
-
3
Go-ahead
Your acceptance turns the quote into a live project. Nothing is typed twice.
-
4
Fieldwork
An inspector with the right credentials works the checklist on site, signal or not.
-
5
Peer review
A second engineer checks the findings. Nobody signs off their own work.
-
6
Delivery
Photographed, costed findings issued with a record of who did what, and when.
Report approved
Sent to you and the named insured · 4:12 pm
Built on Inspection Master
Software that works where the buildings are
Inspections happen in crawlspaces, plant rooms and rural lots with no signal. Our field platform is offline-first, so a dead zone never costs a second mobilisation — and you see results the same day.
-
True offline capture
Findings and photos queue on the device and sync the moment signal returns.
-
Geo-tagged evidence
Every photo records where the inspector stood and when.
-
Independent sign-off
Nobody approves their own work. Every state change is audited.
-
Live visibility
Scope-level progress and approved reports as they happen.
Licensed engineers, not subcontractors
Our own credentialed staff. One accountable party, one standard of care, one signature.
Turnaround you can underwrite to
99.2% on-time delivery against contracted dates, every cycle.
Evidence on every finding
Geo-tagged photographs, condition, severity and a costed recommendation.
One vendor, national portfolio
A single build or a nationwide book — same platform, same report, one invoice.
Client outcomes
Trusted on the assets that matter
“Their progress reports are the reason our builder’s risk book on that development stayed clean. Water intrusion flagged at dry-in, corrected in a week, no claim.”
Elena Marsh
Risk Engineering Lead · Kirkwood Risk Partners
“We took 1,400 scattered-site rentals through acquisition diligence in nine weeks. Same report format on every asset meant our underwriting team could actually compare them.”
Marcus Delaney
VP Asset Management · Northbridge Residential
“My site managers see the report the same evening instead of waiting three weeks for a PDF nobody can search. That alone changed how we run closeout.”
Dale Whitcombe
Regional Property Director · Halstead Commercial Group
National coverage
Field teams within reach of your portfolio
Regional offices and field hubs put a credentialed inspector within a day's mobilisation of most U.S. metros — including catastrophe response after named storms.
Check coverage for my market- Atlanta, GA
- Headquarters · Southeast
- Dallas, TX
- Regional Office · South Central
- Phoenix, AZ
- Regional Office · Southwest
- Chicago, IL
- Regional Office · Midwest
- Charlotte, NC
- Field Hub · Mid-Atlantic
- Sacramento, CA
- Field Hub · West
Common questions
Before you request a quote
Something not covered here? Write to us — a coordinator answers every message, usually the same working day.
Ask a question
Do I need an insurer to engage you?
No. We run two practices side by side. If a builder’s risk carrier is commissioning construction progress inspection, we work through the carrier, developer and broker chain. If you own the property and simply want to know its condition, you engage us directly — no insurer involved, and the report is prepared for you alone.
How is a construction inspection programme priced?
Per product type. Each product — single family, multi family, mid/high rise, commercial, parking structure and so on — carries its own quantities, inspection mode and visit cadence, and is priced from billing hours, number of site visits, travel and where relevant built-up area. Every one of those figures appears as a named line on your proposal.
How quickly can you mobilise?
Standard residential inspections are typically scheduled within 3–5 business days. Construction programmes are mobilised against your schedule, usually within two weeks of acceptance. Catastrophe response and rush scheduling are available on request.
When do I receive the report?
Site visit reports are issued within three business days of each visit, once the project lead has approved them. Residential reports are typically delivered within 24 hours of fieldwork, and a full ASTM E2018 property condition assessment within 5–10 business days.
What happens if the site has no cell signal?
Nothing changes. Our field application caches the full project offline. Inspectors record findings, measurements and photographs without a connection, and everything syncs once the device is back online.
Put a price on your inspection
Send us the address and the question you need answered. An estimator replies with a proposal that names each scope, the standard it follows, what you receive and when — normally by the end of the next business day.
- Priced line by line
- Nothing to sign until you accept
- A named estimator, not a bot